Michael Yee Audio
Nova
Phonomena Battery Replacement...
NOVA PHONOMENA BATTERY POWER SUPPLY BATTERY
REPLACEMENT KIT:
2 Nova Phonomena Battery Packs
1/16" allen wrench
Instruction sheet
You'll also need: 1 pair diagonal cutters
1) Unplug Nova Phonomena from wall
mount transformer.
2) Use the 1/16" allen wrench to remove the twelve screws
that hold the lid in place; remove the lid.
3) Disconnect and remove the batteries from the board, noting the
direction of the red and black wires.
4) Remove the velcro battery pack straps to free the battery
packs, noting the original position of the straps. Remove the old
battery packs.
5) Place two new battery packs one atop the other and secure them
with a velcro strap. Then secure the two-pack to the chassis
using the two remaining straps. Be sure that the edge of the
batteries with the wires emitting is closest to the connectors.
Secure firmly, but do not overtighten.
7) Connect the batteries via the wire connectors to the board
(location J7) with the wires facing towards the battery packs.
8) Replace the lid. Do not overtighten.
IMPORTANT NOTE: Upon receipt of your Nova Phonomena, give the unit an overnight charge before use. This will insure that the batteries are fully charged and the system will perform as expected.
DIAGRAM 1: Interior of the Nova Phonomena with lid removed.
DIAGRAM 2: The Nova Phonomena Battery Replacement Kit (2 Battery Packs, 1 1/16" allen wrench). Re-use the cable ties that originally came with the unit.
DIAGRAM 3: Configuration
